Ti-6Al-4V (Güte 5): Der Workhorse Titanium Alloy
ASTM B265/B348 / AMS 4911 · Published: 2026-06-02 · Updated: July 2026
Ti-6Al-4V (Grade 5) accounts for over 50% of global titanium usage—an alpha-beta alloy with 6% aluminum stabilizing the alpha phase and 4% vanadium stabilizing the beta phase. It provides an unmatched strength-to-weight ratio in the annealed...
Ti-6Al-4V (Güte 5) accounts für über 50% von global titanium usage—ein alpha-beta alloy mit 6% aluminum stabilizing der alpha phase und 4% vanadium stabilizing der beta phase. Es provides ein unmatched strength-zu-weight ratio in der annealed condition: 880 MPa yield bei 4.43 g/cm³—giving es ein spezifisch strength 50% higher als 7075-T6 aluminum und 300% higher als 316L stainless. Excellent corrosion widerstand in seawater, chlorides, und oxidizing acids due zu der self-healing TiO2 passive film. Biocompatible—der standard material für orthopedic und dental implants. Service temperature bereich: -253°C (cryogenic) zu 350°C (lang-term), 400°C kurz-term. Über 350°C, der oxide film thickens und oxygen embrittlement von der surface occurs. Weldable mit matching filler unter inert gas shielding (GTAW). Poor tribological properties (galling, fretting)—surface treatments (anodizing, nitriding) sind wesentlich für wear applications.
Quick Facts
| Kategorie | Titanium Alloy |
| Norm | ASTM B265/B348 / AMS 4911 |
| Density | 4.43 g/cm³ |
| Yield Strength | 880 MPa (128 ksi) annealed |
| Tensile Strength | 950 MPa (138 ksi) annealed |
Global Equivalents & Cross-Reference
| Alternative Norm / Güte | Action |
|---|---|
| EN 3.7165 | Compare |
| BT6 | Compare |
| JIS TAP6400 | Compare |
| TC4 | Compare |
| ISO Ti-6Al-4V | Compare |
Verwandt Comparisons
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 4.43 g/cm³
Frequently Asked Questions
Können Ti-6Al-4V sein machined mit conventional tooling?
Titanium's niedrig thermal conductivity (7 W/m·K vs steel's 50 W/m·K) concentrates heat bei der werkzeug tip, causing rapid werkzeug wear. Verwenden sharp carbide tooling (C2 grade), niedrig cutting speeds (30-60 m/min für turning vs 150+ für steel), hoch feed rates, und copious coolant directed bei der cutting zone. Avoid dwelling—halten der werkzeug moving durch der cut. Der 'titanium machining rule': maintain 10× der coolant flow rate und 1/3 der cutting geschwindigkeit used für steel.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu