AISI 4140 Chromoly Stahl: Heat Treatment, Härte & Mechanical Eigenschaften (UNS G41400)
ASTM A29 / A322 / A331 / SAE J404 · Published: 2026-05-31 · Updated: July 2026
AISI 4140 is the most widely used medium-carbon chromium-molybdenum alloy steel, offering an exceptional combination of strength, toughness, and fatigue resistance after heat treatment. Containing 0.38-0.43% carbon with chromium (0.80-1.10%) and...
AISI 4140 ist der meiste widely used medium-carbon chromium-molybdenum alloy steel, offering ein exceptional combination von strength, toughness, und fatigue widerstand nach heat treatment. Containing 0.38-0.43% carbon mit chromium (0.80-1.10%) und molybdenum (0.15-0.25%), 4140 achieves deep hardenability in sections auf zu 50 mm, making es der default choice für hoch-stress machine components: shafts, gears, bolts, drill collars, und aircraft landing gear teile. Es ist durch-hardening (nicht case-hardening) und responds well zu induction hardening für surface wear widerstand while maintaining ein tough core.
Quick Facts
| Kategorie | Legierungsstahl |
| Norm | ASTM A29 / A322 / A331 / SAE J404 |
| Density | 7.85 g/cm³ |
| Yield Strength | 415-655 MPa (60-95 ksi) depending on heat treatment |
| Tensile Strength | 655-1075 MPa (95-156 ksi) depending on heat treatment |
Global Equivalents & Cross-Reference
| Alternative Norm / Güte | Action |
|---|---|
| EN 42CrMo4 | Compare |
| DIN 1.7225 | Compare |
| JIS SCM440 | Compare |
| GB 42CrMo | Compare |
| BS 708M40 | Compare |
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7.85 g/cm³
Frequently Asked Questions
Was ist der recommended heat treatment für AISI 4140?
Austenitize bei 845°C (1550°F), öl quench für sections auf zu 25 mm (wasser quench für larger sections mit risk von cracking), temper immediately bei 205-650°C (400-1200°F) depending ein desired hardness. Tempering bei 205°C yields ~55 HRC (hoch strength, niedrig toughness); tempering bei 540°C yields ~35 HRC (balanced strength und toughness für shafting). Immer temper immediately nach quenching — untempered martensite ist brittle und können crack spontaneously.
Können AISI 4140 sein welded?
Ja, but mit significant precautions due zu sein 0.38-0.43% carbon content (hoch carbon equivalent). Preheat zu 200-300°C (400-570°F), maintain interpass temperature, verwenden niedrig-hydrogen electrodes (E7018 oder E10018-D2 für hoch strength), und durchführen post-weld stress relief bei 595-650°C (1100-1200°F) für 1 hour per 25 mm thickness. Ohne ordnungsgemäß preheat und PWHT, der heat-affected zone werden form brittle martensite und crack — especially in restrained joints.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu