S7 Shock-Resisting Werkzeugstahl: Properties, Heat Treatment & Die Applications
ASTM A681 / UNS T41907 · Published: 2026-06-02 · Updated: July 2026
S7 is an air-hardening shock-resisting tool steel with a unique combination of high impact toughness and moderate wear resistance. Unlike high-carbon cold-work steels (D2, A2) which are brittle when fully hardened, S7 retains Charpy V-notch...
S7 ist ein luft-hardening shock-resisting werkzeug steel mit ein unique combination von hoch impact toughness und moderate wear widerstand. Unlike hoch-carbon kalt-arbeiten steels (D2, A2) welche sind brittle wenn fully hardened, S7 retains Charpy V-notch impact values von 15-25 J even bei 56-58 HRC — making es der preferred material für tooling subjected zu impact loading. Der luft-hardening characteristic (kritisch cooling rate <5°C/min) means large sections can be hardened uniformly with minimal distortion — oil quenching is not required. Typical applications: chisels, punches, shear blades, pneumatic tool bits, rivet sets, bull riveters, and plastic mold components requiring impact resistance.
Heat treatment: austenitize bei 930-955°C, soak 30 minutes per 25mm von abschnitt thickness, luft cool (oder öl quench für maximum hardness in large sections). Temper immediately nach quenching — double temper bei 200-300°C für 56-58 HRC (hoch hardness/ moderate toughness) oder 400-500°C für 50-54 HRC (maximum toughness mit unter hardness). Avoid tempering zwischen 300-400°C — dies bereich causes tempered martensite embrittlement (TME) und reduces impact toughness durch 30-50%. S7 ist nicht suitable für applications requiring wear widerstand comparable zu D2 oder M2 — sein chromium content (3.25%) ist zu niedrig zu form der hard M7C3 carbides das bereitstellen D2's wear widerstand.
Quick Facts
| Kategorie | Werkzeugstahl |
| Norm | ASTM A681 / UNS T41907 |
| Density | 7750 kg/m³ |
| Yield Strength | 1,600-1,800 MPa (hardened & tempered) |
| Tensile Strength | 1,800-2,000 MPa |
Global Equivalents & Cross-Reference
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7750 kg/m³
Frequently Asked Questions
Was ist der difference zwischen S7 und H13 werkzeug steel?
S7 ist ein shock-resisting steel optimized für impact toughness bei room temperature — ideal für kalt-arbeiten impact tools (chisels, punches, rivet sets). H13 ist ein heiß-arbeiten steel optimized für strength und thermal fatigue widerstand bei elevated temperatures (auf zu 600°C) — ideal für die casting dies, extrusion dies, und heiß forging tooling. S7 ist nicht suitable für heiß-arbeiten applications because sein temper widerstand ist poor über 500°C. H13 ist nicht suitable für kalt-arbeiten impact applications because sein impact toughness bei room temperature ist unter als S7.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu