S460NL Normalized Fine-Grain Hoch-Strength Stahl
EN 10025-3:2019 · Published: 2026-06-02 · Updated: July 2026
S460NL is a normalized fine-grain high-strength structural steel with 460 MPa minimum yield strength and guaranteed Charpy V-notch impact toughness of 27 Joules at -50°C—the most demanding low-temperature designation in the EN 10025-3 standard....
S460NL ist ein normalized fine-grain hoch-strength structural steel mit 460 MPa minimum yield strength und guaranteed Charpy V-notch impact toughness von 27 Joules bei -50°C—der meiste demanding niedrig-temperature designation in der EN 10025-3 standard. Der 'N' denotes normalized delivery condition; der 'L' suffix mandates longitudinal Charpy testing bei -50°C. Dies ist steel für der meiste demanding structural applications: Arctic offshore platforms, cryogenic storage tank shells, North Sea wind turbine foundations, und polar-class ship structures. Der fine-grain practice (aluminum-killed mit micro-alloying von niobium und vanadium) produces uniform durch-thickness properties in plates auf zu 100 mm. CEV ist controlled unter 0.45-0.47 depending ein thickness zu ensure adequate field weldability despite der hoch strength level.
Quick Facts
| Kategorie | Kohlenstoffstahl |
| Norm | EN 10025-3:2019 |
| Density | 7.85 g/cm³ |
| Yield Strength | 460 MPa (67 ksi) |
| Tensile Strength | 540-720 MPa |
Global Equivalents & Cross-Reference
| Alternative Standard / Grade | Action |
|---|---|
| ASTM A572 Gr 65 | Compare |
| Q460D | Compare |
| SM570 | Compare |
| E460 | Compare |
| S460N | Compare |
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7.85 g/cm³
Frequently Asked Questions
Wie tut S460NL compare zu S690QL?
S690QL ist ein quenched und tempered grade mit 690 MPa yield—50% higher als S460NL—but ist limited zu -40°C impact testing (vs S460NL's -50°C). Für extreme niedrig-temperature service (-40°C zu -60°C) wo strength über 460 MPa ist nicht wesentlich, S460NL ist der korrekt choice. Für ambient-temperature applications requiring maximum strength-zu-weight ratio, S690QL ist mehr efficient.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu