Incoloy 800H (UNS N08810): Hoch-Temperatur Nickel-Iron-Chromium Alloy
ASTM B407 / ASTM B163 · Published: 2026-06-02 · Updated: July 2026
Incoloy 800H (UNS N08810) is a nickel-iron-chromium alloy designed for high-temperature structural applications up to 1,100°C. It is the solution-annealed and coarse-grain variant of Incoloy 800 — the controlled carbon content (0.05-0.10%) and...
Incoloy 800H (UNS N08810) ist ein nickel-iron-chromium alloy designed für hoch-temperature structural applications auf zu 1,100°C. Es ist der solution-annealed und coarse-grain variant von Incoloy 800 — der controlled carbon content (0.05-0.10%) und grain size (ASTM 5 oder coarser) bereitstellen superior creep und stress-rupture properties compared zu standard 800. Der alloy's defining characteristic ist sein widerstand zu sigma phase embrittlement bei intermediate temperatures (550-850°C) wo standard austenitic stainless steels (304H, 316H) become embrittled und unsuitable für load-bearing service.
Primär applications: ethylene furnace cracking tubes (operating bei 850-950°C), hydrocarbon steam reforming tubes, petrochemical furnace components, und heat treatment furnace radiant tubes, muffles, und retorts. Der alloy develops ein protective chromium oxide scale das remains adherent unter thermal cycling, providing oxidation widerstand in luft und combustion gases. Carburization widerstand (widerstand zu carbon diffusion von hydrocarbon atmospheres) ist superior zu stainless steels due zu der hoch nickel content — nickel tut nicht form stable carbides, limiting carbon penetration. Für applications über 1,000°C, Incoloy 800HT (UNS N08811) mit tighter aluminum und titanium steuerung provides enhanced creep strength.
Quick Facts
| Kategorie | Nickel Alloy |
| Norm | ASTM B407 / ASTM B163 |
| Density | 7940 kg/m³ |
| Yield Strength | 170 MPa (annealed) |
| Tensile Strength | 520 MPa |
Global Equivalents & Cross-Reference
| Alternative Standard / Grade | Action |
|---|---|
| UNS N08810 | Compare |
| EN 1.4958 X5NiCrAlTi31-20 | Compare |
| Alloy 800H | Compare |
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7940 kg/m³
Frequently Asked Questions
Wenn sollte I verwenden Incoloy 800H vs 310 stainless steel?
310 SS (25Cr-20Ni) hat similar oxidation widerstand zu 800H but ist significantly mehr prone zu sigma phase embrittlement nach exposure bei 600-850°C. Wenn der komponente experiences thermal cycling durch dies temperature bereich (e.g., furnace startups und shutdowns), 800H ist preferred. Wenn der application ist gleichmäßig-state über 900°C und thermal cycling ist minimal, 310 SS kann sein adequate bei unter kosten.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu