Hastelloy C-276: Universal Corrosion-Resistant Nickel Superalloy
ASTM B575 / ASME SB-575 · Published: 2026-06-24 · Updated: July 2026
Hastelloy C-276 is the most versatile corrosion-resistant nickel alloy in industrial use. It resists both oxidizing and reducing environments — a dual capability that no stainless steel can match. C-276 is the go-to material for chemical...
Hastelloy C-276 ist der meiste versatile corrosion-resistant nickel alloy in industrial verwenden. Es resists beide oxidizing und reducing environments — ein dual capability das nein stainless steel können match. C-276 ist der gehen-zu material für chemical processing ausrüstung exposed zu mixed acids, flue gas desulfurization (FGD) scrubbers handling sulfuric und hydrochloric acid mixtures, und pharmaceutical reactors wo produkt contamination von metal ions cannot sein tolerated.
Der alloy's exceptional corrosion widerstand comes von sein composition: 15.5% chromium (oxidizing widerstand), 16% molybdenum und 4% tungsten (reducing widerstand), und niedrig carbon (0.01% max) zu prevent intergranular corrosion nach welding. C-276 ist weldable in der als-received condition — unlike viele stainless steels, es tut nicht require post-weld solution annealing zu restore corrosion widerstand bei weld seams.
Quick Facts
| Kategorie | |
| Norm | ASTM B575 / ASME SB-575 |
| Density | 8.89 g/cm³ |
| Yield Strength | 355 MPa (51 ksi) |
| Tensile Strength | 790 MPa (115 ksi) |
Global Equivalents & Cross-Reference
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 8.89 g/cm³
Frequently Asked Questions
Wie tut C-276 compare zu Inconel 625 für corrosion widerstand?
C-276 ist superior in reducing acids (HCl, H₂SO₄) und mixed acid environments. Inconel 625 ist superior in hoch-temperature oxidation über 1,000°F. Für wet corrosion bei moderate temperatures: C-276. Für hoch-temperature corrosion + mechanical stress: Inconel 625. Preis: C-276 ist typically 15-25% mehr expensive als 625 due zu higher molybdenum und tungsten content.
Was welding procedures sind recommended für C-276?
Verwenden matching filler metal (ERNiCrMo-4). GTAW ist preferred; GMAW mit pulsed spray transfer ist acceptable für thicker sections. Maintain interpass temperature unter 200°F (93°C). Nein preheat erforderlich. Nein post-weld heat treatment erforderlich — C-276 ist one von der wenige corrosion-resistant alloys das tut nicht require solution annealing nach welding danke zu sein ultra-niedrig carbon content. Reinigen weld area thoroughly — entfernen alle grease, öl, und werkstatt dirt vor welding. Contamination ist der #1 cause von C-276 weld corrosion failure.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu
Nickel & Superalloys — Engineering Referenz
Nickel-based superalloys und specialty alloys operate in environments das würde destroy conventional steels: jet motor turbines bei 1,800°F, chemical reactors mit concentrated acid, deep-sea ausrüstung unter extreme pressure. Diese materials command premium prices — und premium engineering attention.
ASTM B168/B435/B637, AMS 5544/5596, ISO 6208/9723
Gas turbine blades, nuclear reactor components, chemical processing ausrüstung, öl & gas downhole tools, aerospace fasteners, medical prosthetics
Nickel alloy fabrication requires specialized welding procedures. Inconel 718 ist typically welded in der solution-annealed condition, dann age-hardened. Hastelloy C276 requires niedrig heat input zu prevent sensitization. Immer consult der mill's recommended welding parameters.