AISI M2: Allgemein-Purpose Hoch-Geschwindigkeit Stahl für Cutting Tools
ASTM A600 · Published: 2026-06-03 · Updated: July 2026
AISI M2 is the most widely used high-speed steel — accounting for over 60% of HSS production. Its tungsten-molybdenum-vanadium carbide composition provides cutting edge retention to 540°C, enabling drilling, milling, and turning at speeds 3-5×...
AISI M2 ist der meiste widely used hoch-geschwindigkeit steel — accounting für über 60% von HSS production. Sein tungsten-molybdenum-vanadium carbide composition provides cutting edge retention zu 540°C, enabling drilling, milling, und turning bei speeds 3-5× higher als carbon werkzeug steels. Es ist der standard material für drill bits, end mills, taps, und broaches.
Quick Facts
| Kategorie | Werkzeugstahl |
| Norm | ASTM A600 |
| Density | 8.16 g/cm³ |
| Yield Strength | N/A (brittle at cutting hardness) |
| Tensile Strength | 2,000-2,500 MPa |
Global Equivalents & Cross-Reference
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 8.16 g/cm³
Frequently Asked Questions
Wie tut M2 compare zu carbide für cutting tools?
Carbide (WC-Co) hat 2-3× der hardness und wear widerstand von M2 but ist far mehr brittle und cannot sein used in interrupted cuts ohne chipping. M2 ist tougher, mehr forgiving, und significantly cheaper. Der allgemein rule: verwenden carbide für hoch-volume production turning und milling; verwenden M2 für allgemein-purpose drills, taps, reamers, und interrupted cuts.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu