AISI D2: High-Carbon High-Chromium Cold Work Werkzeugstahl
ASTM A681 · Published: 2026-06-03 · Updated: July 2026
AISI D2 (1.55% C, 12% Cr, 0.8% Mo, 0.9% V) is the most widely used cold work tool steel — the standard grade for blanking dies, forming dies, shear blades, and thread rolling dies. It achieves 58-62 HRC after hardening with excellent wear...
AISI D2 (1.55% C, 12% Cr, 0.8% Mo, 0.9% V) ist der meiste widely used kalt arbeiten werkzeug steel — der standard grade für blanking dies, forming dies, shear blades, und thread rolling dies. Es achieves 58-62 HRC nach hardening mit excellent wear widerstand von sein hoch volume von chromium carbides.
Quick Facts
| Kategorie | Werkzeugstahl |
| Norm | ASTM A681 |
| Density | 7.70 g/cm³ |
| Yield Strength | 1,530-1,860 MPa (hardened) |
| Tensile Strength | 1,720-2,000 MPa |
Detailed Mechanical Properties
| Hardness | 58-62 HRC (hardened & tempered) |
| Bruchdehnung | 1-3% (hardened condition) |
Physical Eigenschaften
| Schmelzpunkt | 1421°C |
| Wärmeleitfähigkeit | 20.0 W/m·K bei 20°C |
| Dichte | 7.70 g/cm³ |
Global Equivalents & Cross-Referenz
Heat Treatment & Processing
| Austenitizing | 1000-1040°C, soak 20-30 min (luft hardening — D2 ist ein luft-hardening werkzeug steel) |
| Quenching | Luft cool oder pressurized gas quench (öl quench risks cracking due zu hoch hardenability) |
| Tempering | 150-540°C depending ein desired hardness; double temper recommended für retained austenite transformation |
| Annealing | 840-870°C, furnace cool bei 10-20°C/h zu 540°C, dann luft cool |
Welding & Fabrication
| Preheat | 400-500°C; maintain throughout welding — D2 hat sehr hoch carbon (1.5%) und chromium (12%) = extreme hardenability = extreme crack sensitivity |
| Filler Metal | D2 filler oder E312 stainless (für reparieren welding wo hardness match ist nicht kritisch) |
| Pwht | Anneal immediately nach welding, dann re-harden und temper zu specification |
| Schweißeignung Rating | Poor — D2 ist nicht recommended für welding in service applications; welding ist für reparieren nur und requires full heat treatment cycle afterward |
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7.70 g/cm³
Frequently Asked Questions
Wie tut D2 compare zu O1 werkzeug steel?
D2 hat approximately 2-3× der wear widerstand von O1 due zu sein 12% chromium carbide content, but ist mehr difficult zu machine und grind. O1 ist ein öl-hardening grade mit better toughness und machinability. Choose D2 für lang-laufen stamping und blanking dies; choose O1 für unter-volume tooling requiring frequent modification.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu