AISI A2 Air-Hardening Cold Work Werkzeugstahl: Distortion-Free Grade
ASTM A681 · Published: 2026-06-02 · Updated: July 2026
AISI A2 is a 5% chromium air-hardening cold work tool steel (0.95-1.05% C, 4.75-5.50% Cr, 0.90-1.40% Mo, 0.15-0.50% V)—the intermediate choice between O1 (oil-hardening, lower wear) and D2 (high Cr, higher wear, lower toughness). A2 hardens from...
AISI A2 ist ein 5% chromium luft-hardening kalt arbeiten werkzeug steel (0.95-1.05% C, 4.75-5.50% Cr, 0.90-1.40% Mo, 0.15-0.50% V)—der intermediate choice zwischen O1 (öl-hardening, unter wear) und D2 (hoch Cr, higher wear, unter toughness). A2 hardens von 925-980°C mit luft cooling—minimal distortion compared zu öl quenching von O1—making es der choice für complex die shapes, thread rolling dies, coining dies, und precision gauges. Der unter chromium carbide volume als D2 provides better toughness und grindability, while noch offering significantly better wear widerstand als O1. Achieves 58-62 HRC nach tempering bei 175-540°C. Für maximum toughness (forming und blanking dies subject zu chipping), temper bei 480-540°C; für maximum wear widerstand (gauges, shear blades), temper bei 175-260°C.
Quick Facts
| Kategorie | Werkzeugstahl |
| Norm | ASTM A681 |
| Density | 7.85 g/cm³ |
| Yield Strength | 1,450 MPa (210 ksi) at 60 HRC |
| Tensile Strength | 1,760 MPa (255 ksi) at 60 HRC |
Physical Properties
| Melting Point | 1430°C |
| Wärmeleitfähigkeit | 26 W/m·K |
| Dichte | 7.86 g/cm³ |
Global Equivalents & Cross-Referenz
| Alternative Norm / Güte | Action |
|---|---|
| EN X100CrMoV5 | Compare |
| DIN 1.2363 | Compare |
| SKD12 | Compare |
| Cr5Mo1V | Compare |
| JIS SKD12 | Compare |
Heat Treatment & Processing
| Austenitizing | 925-980°C |
| Quenching | Luft cool |
| Tempering | 150-540°C; double temper |
| Annealing | 840-870°C, furnace cool |
Welding & Fabrication
| Preheat | 300-400°C |
| Filler Metal | A2 filler oder E312 |
| Schweißeignung Rating | Poor — reparieren nur |
Verwandt Comparisons
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7.85 g/cm³
Frequently Asked Questions
Sollte A2 sein double-tempered?
Ja, double tempering ist recommended—especially für der sekundär-hardening temper bereich (480-540°C). A2 contains approximately 5-10% retained austenite nach luft hardening; der erste temper transforms dies zu fresh martensite; der second temper tempers der fresh martensite. Für tools tempered unter 260°C wo retained austenite ist stable, single tempering kann sein acceptable für non-kritisch applications, but double tempering ist industry best practice.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu