254 SMO (UNS S31254): Super Austenitic Edelstahl for Seawater & Chemical Service
ASTM A240 / ASTM A312 · Published: 2026-06-02 · Updated: July 2026
254 SMO (UNS S31254) is a super austenitic stainless steel with a Pitting Resistance Equivalent Number (PREN) of 43, placing it above duplex 2205 (PREN 34-36) and approaching super duplex 2507 (PREN 42+). The 6% molybdenum content is the key...
254 SMO (UNS S31254) ist ein super austenitic stainless steel mit ein Pitting Widerstand Entsprechung Number (PREN) von 43, placing es über duplex 2205 (PREN 34-36) und approaching super duplex 2507 (PREN 42+). Der 6% molybdenum content ist der key differentiator — es provides chloride pitting widerstand sufficient für seawater service ohne der kosten oder welding complexity von nickel-base alloys wie Inconel 625 (PREN 50+) oder Hastelloy C276 (PREN 65+). 254 SMO ist der meiste commonly specified material für seawater-cooled heat exchangers, offshore platform piping, und flue gas desulfurization (FGD) scrubbers wo chloride concentrations preclude 316L und duplex 2205.
While 254 SMO ist classified als stainless steel (iron-based, >50% Fe), sein alloy content von nickel (17.5-18.5%), chromium (19.5-20.5%), molybdenum (6.0-6.5%), und nitrogen (0.18-0.22%) places es bei der boundary zwischen stainless steels und nickel alloys. Dies composition provides der seawater corrosion widerstand von ein nickel alloy bei approximately 50-60% von der kosten. Welding: matching filler metal (ERNiCrMo-3, Inconel 625 filler) ist erforderlich zu maintain corrosion widerstand in der weld zone. Autogenous welding (ohne filler) depletes molybdenum in der weld metal und reduces PREN unter acceptable levels. Post-weld pickling und passivation ist recommended für maximum corrosion widerstand.
Quick Facts
| Kategorie | Edelstahl |
| Norm | ASTM A240 / ASTM A312 |
| Density | 8000 kg/m³ |
| Yield Strength | 300 MPa |
| Tensile Strength | 650-850 MPa |
Global Equivalents & Cross-Reference
| Alternative Standard / Grade | Action |
|---|---|
| UNS S31254 | Compare |
| EN 1.4547 X1CrNiMoCuN20-18-7 | Compare |
| 6Mo stainless steel | Compare |
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 8000 kg/m³
Frequently Asked Questions
Was ist der PREN formula und wie ist es calculated?
PREN = %Cr + 3.3 × %Mo + 16 × %N. Für 254 SMO: 20 + 3.3×6.1 + 16×0.20 = 20 + 20.1 + 3.2 = 43.3. EIN PREN über 40 ist considered suitable für seawater service. Für comparison: 316L PREN = 17 + 3.3×2.1 + 16×0.05 = 24.7 (unsuitable für seawater); Duplex 2205 PREN = 22 + 3.3×3.0 + 16×0.17 = 34.6 (marginal für seawater); Super duplex 2507 PREN = 25 + 3.3×4.0 + 16×0.28 = 42.7 (suitable für seawater).
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu