15-5PH Edelstahl (UNS S15500): Aerospace & High-Strength Applications
AMS 5659 / ASTM A564 · Published: 2026-06-02 · Updated: July 2026
15-5PH is a martensitic precipitation-hardening stainless steel produced by vacuum arc remelting (VAR) or electroslag remelting (ESR). Its chemical composition is identical to 17-4PH except for slightly higher nickel (3.5-5.5% vs 3.0-5.0%) and...
15-5PH ist ein martensitic precipitation-hardening stainless steel produced durch vacuum arc remelting (VAR) oder electroslag remelting (ESR). Sein chemical composition ist identical zu 17-4PH except für slightly higher nickel (3.5-5.5% vs 3.0-5.0%) und mehr tightly controlled chromium (14.0-15.5% vs 15.0-17.5%). Der VAR/ESR production route yields significantly cleaner steel mit unter inclusion content, translating zu superior transverse ductility und impact toughness — der key advantage über conventionally melted 17-4PH. Transverse reduction von area für 15-5PH H1025 ist typically >45% vs >35% für 17-4PH.
Primär applications: aerospace structural components (landing gear teile, actuator fittings, helicopter rotor components) wo transverse properties sind kritisch und failure ist nicht ein option. Auch specified für nuclear reactor components (steuerung rod fahren mechanisms) wo material consistency und traceability sind paramount. Der kosten premium für 15-5PH über 17-4PH ist typically 20-40% due zu der VAR/ESR processing. Wenn zu pay dies premium: applications wo der teil ist loaded in der transverse direction (kurz-transverse properties matter), oder wo inclusion-initiated fatigue failures könnte sein catastrophic. Für axially loaded shafts wo der principal stress aligns mit der longitudinal direction, 17-4PH ist adequate.
Quick Facts
| Kategorie | Edelstahl |
| Norm | AMS 5659 / ASTM A564 |
| Density | 7810 kg/m³ |
| Yield Strength | 1,170-1,310 MPa (Condition H900-H1025) |
| Tensile Strength | 1,310-1,380 MPa |
Global Equivalents & Cross-Reference
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7810 kg/m³
Frequently Asked Questions
Warum choose 15-5PH über 17-4PH wenn compositions sind nearly identical?
15-5PH ist produced durch VAR (vacuum arc remelting) welche significantly reduces non-metallic inclusion content. Inclusions sind der primär initiation sites für fatigue cracks und stress corrosion cracking. Für safety-kritisch aerospace und nuclear components, der 20-40% kosten premium für cleaner steel ist justified durch der reduction in inclusion-initiated failure probability.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu