AISI D2 Cold Work Werkzeugstahl: High-Carbon High-Chromium
ASTM A681 · Published: 2026-06-02 · Updated: July 2026
AISI D2 is a high-carbon high-chromium cold work tool steel (1.40-1.60% C, 11.0-13.0% Cr) providing excellent wear resistance from massive primary chromium carbides combined with good toughness for a high-carbon grade. Air-hardens from...
AISI D2 ist ein hoch-carbon hoch-chromium kalt arbeiten werkzeug steel (1.40-1.60% C, 11.0-13.0% Cr) providing excellent wear widerstand von massive primär chromium carbides combined mit gut toughness für ein hoch-carbon grade. Luft-hardens von 1,010-1,040°C mit minimal distortion due zu sein hoch hardenability—hence der 'D' designation (die steel, luft hardening). Used für blanking und forming dies, shear blades, thread rolling dies, und kalt extrusion punches. Der hoch chromium content auch provides moderate corrosion widerstand compared zu öl-hardening grades wie O1. Achieves 58-62 HRC nach tempering bei 150-540°C depending ein desired hardness-toughness balance.
Quick Facts
| Kategorie | Werkzeugstahl |
| Norm | ASTM A681 |
| Density | 7.70 g/cm³ |
| Yield Strength | 1,530 MPa (222 ksi) at 58-60 HRC |
| Tensile Strength | 1,720 MPa (249 ksi) at 58-60 HRC |
Global Equivalents & Cross-Reference
| Alternative Norm / Güte | Action |
|---|---|
| EN X153CrMoV12 | Compare |
| DIN 1.2379 | Compare |
| SKD11 | Compare |
| Cr12MoV | Compare |
| JIS SKD11 | Compare |
Verwandt Comparisons
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7.70 g/cm³
Frequently Asked Questions
Wie tut D2 compare zu A2 für kalt arbeiten tooling?
D2 offers superior wear widerstand (von 12% Cr massive carbides) für hoch-production stamping und blanking wo werkzeug life zwischen regrinds ist der primär kosten fahrer. A2 (5% Cr) provides better toughness und dimensional stability für complex tools wo chipping, rather als wear, ist der failure mode. D2 ist auch slightly mehr corrosion-resistant. Beide sind luft-hardening.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu