ASTM A516 Grade 70 Pressure Vessel Steel: ASME Certified Kohlenstoffstahl Plate
ASTM A516/A516M / ASME SA-516 · Published: 2026-05-31 · Updated: July 2026
ASTM A516 Grade 70 is the most widely specified carbon steel for welded pressure vessels in moderate and lower-temperature service. It is one of only a handful of carbon steel grades approved under ASME Boiler and Pressure Vessel Code Section II...
ASTM A516 Güte 70 ist der meiste widely specified carbon steel für welded pressure vessels in moderate und unter-temperature service. Es ist one von nur ein handful von carbon steel grades approved unter ASME Boiler und Druck Vessel Code Abschnitt II für pressure-containing applications. A516 Gr 70 ist silicon-killed mit fine-grain practice und normalized für thicknesses über 40 mm, providing guaranteed notch toughness bei temperatures als niedrig als -46°C (-50°F) wenn impact tested. Used extensively in LPG storage spheres, refinery vessels, chemical reactors, und power plant boilers.
Quick Facts
| Kategorie | Kohlenstoffstahl |
| Norm | ASTM A516/A516M / ASME SA-516 |
| Density | 7.85 g/cm³ |
| Yield Strength | 260 MPa (38 ksi) minimum |
| Tensile Strength | 485-620 MPa (70-90 ksi) |
Global Equivalents & Cross-Reference
| Alternative Norm / Güte | Action |
|---|---|
| EN P355GH | Compare |
| DIN 17Mn4 | Compare |
| JIS SPV355 | Compare |
| GB Q345R | Compare |
| BS 1501-224 | Compare |
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7.85 g/cm³
Frequently Asked Questions
Können A516 Gr 70 ersetzen A36 in structural applications?
Technically ja (A516 Gr 70 hat superior toughness und cleanliness), but es ist NICHT kosten-effective. A516 Gr 70 ist approximately 40-60% mehr expensive als A36 due zu: silicon-killed fine-grain melting practice, mandatory normalization über 40 mm, und ASME certification requirements. Verwenden A516 Gr 70 nur wenn der design code (ASME Abschnitt VIII, API 650/620, etc.) requires es. Für allgemein structural applications wo ASME certification ist nicht erforderlich, A36 oder A572 Gr 50 ist der appropriate, kosten-effective choice.
Was ist der difference zwischen A516 Gr 70 und A516 Gr 70N?
Der 'N' suffix indicates normalization ist mandatory regardless von plate thickness. Für standard A516 Gr 70 ohne der N suffix, normalization ist nur erforderlich für thicknesses >40 mm per ASTM A20/A20M. Specifying A516 Gr 70N guarantees normalized microstructure und properties durch full thickness — recommended für hydrogen service, niedrig-temperature applications, oder wenn Charpy V-notch impact values sind kritisch. Der kosten premium für mandatory normalization ist approximately 10-15%.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu