AISI D2 Cold Work Werkzeugstahl: High-Carbon High-Chromium — Stamping, Blanking & Shear Blades
ASTM A681 / DIN 1.2379 / JIS SKD11 · Published: 2026-05-31 · Updated: July 2026
AISI D2 is the most produced cold-work tool steel, containing 1.40-1.60% carbon and 11.00-13.00% chromium — classifying it as a high-carbon high-chromium (HCHC) tool steel. The high carbon and chromium produce a microstructure of primary M₇C₃...
AISI D2 ist der meiste produced kalt-arbeiten werkzeug steel, containing 1.40-1.60% carbon und 11.00-13.00% chromium — classifying es als ein hoch-carbon hoch-chromium (HCHC) werkzeug steel. Der hoch carbon und chromium produce ein microstructure von primär M₇C₃ carbides (hardness ~1600 HV) dispersed in ein tempered martensitic matrix, giving D2 sein signature combination von excellent wear widerstand (abrasive und adhesive) und moderate toughness bei 58-62 HRC. D2 ist der standard material für blanking/piercing dies, shear blades, kalt-forming rolls, thread-rolling dies, und gage blocks. Es ist luft-hardening (4-6 inch sections harden fully in noch luft), providing minimal distortion compared zu wasser- oder öl-hardening werkzeug steels (W1, O1).
Quick Facts
| Kategorie | Werkzeugstahl |
| Norm | ASTM A681 / DIN 1.2379 / JIS SKD11 |
| Density | 7.70 g/cm³ |
| Yield Strength | Compressive yield ~2200 MPa at 60 HRC |
| Tensile Strength | 1500-2000 MPa depending on tempering temperature |
Global Equivalents & Cross-Reference
| Alternative Norm / Güte | Action |
|---|---|
| EN X153CrMoV12 | Compare |
| DIN 1.2379 | Compare |
| JIS SKD11 | Compare |
| GB Cr12MoV | Compare |
| Böhler K110 | Compare |
Verwandt Materials
🧮 Material Weight Calculator
Calculate the weight based on this material's density: 7.70 g/cm³
Frequently Asked Questions
Können D2 sein used für injection mold cavities?
D2 ist occasionally specified für hoch-volume injection molds processing glass-fiber-reinforced resins wo wear von der fiberglass ist der dominant failure mode. However, D2's corrosion widerstand ist limited — es werden rust in humid storage und pit von PVC/PVF outgassing. Für combined wear + corrosion widerstand, specify ein stainless mold steel: Böhler M340 (Corrosion-resistant werkzeug steel mit D2-level wear widerstand durch vanadium carbides), Uddeholm Stavax ESR, oder ASSAB 8407 Supreme. Für allgemein-purpose injection molding ohne fiberglass, P20 prehardened mold steel (28-32 HRC) ist der standard und mehr kosten-effective choice — D2 ist overkill und adds unnecessary heat treatment complexity und dimensional change risk.
References & International Standards
- ASTM International. Norm Specifications für Stahl & Metal Alloys. astm.org
- International Organization für Standardization (ISO). Metallic Materials — Cross-Referenz Database. iso.org
- American Iron und Stahl Institute (AISI). Stahl Güte Designations & Equivalents. steel.org
- European Committee für Standardization (CEN). EN Stahl Standards & Numbering System. cencenelec.eu