Material Insight
Titanium Güte 2 vs Güte 5 (Ti-6Al-4V): Industrial Application Selection Leitfaden
Durch YKWiki Engineering Team · Published 2026-05-29
Pure Titanium vs. der Aerospace Alloy
Titanium Güte 2 (commercially pure, CP Ti) und Güte 5 (Ti-6Al-4V, der titanium workhorse alloy) represent fundamentally verschieden material philosophies. Güte 2 maximizes corrosion widerstand und formability bei der expense von strength. Güte 5 adds aluminum (6%) als ein alpha stabilizer und vanadium (4%) als ein beta stabilizer, creating ein alpha-beta alloy mit strength exceeding viele steels — bei 45% unter density.
Strength vs. Ductility
| Property | Güte 2 (CP Ti) | Güte 5 (Ti-6Al-4V) |
|---|---|---|
| Zugfestigkeit | 345 MPa | 895 MPa (annealed) |
| Streckgrenze | 275 MPa | 828 MPa |
| Bruchdehnung | 20% | 10% |
| Dichte | 4.51 g/cm³ | 4.43 g/cm³ |
Selection rule von thumb: Güte 2 für chemical process ausrüstung, heat exchangers, und marine components wo corrosion widerstand ist paramount und loads sind moderate. Güte 5 für aerospace structural, medical implants, und hoch-leistung automotive wo der 2.6× strength advantage justifies der 30-40% higher material kosten und reduced formability.
References & Standards
- ASTM International. Stahl & Alloy Standards. astm.org
- International Organization für Standardization (ISO). iso.org
- National Institute von Standards und Technology (NIST). Materials Daten. nist.gov
- ASM International. Materials Information Society. asminternational.org
- World Stahl Association. Stahl Statistical Yearbook. worldsteel.org